Our network has grown, and through the year vlan standards have not always been consistent/followed. At our disposal are the standard tools (snmp, port scans, etc) and Ridgeline v4 and Epicenter.
...
Hello,
we want to setup V400 switches with a VX-RPS-1000. What ratio does the RPS serve? Is it a 1:1 per V400 switch or can I connect more than one switch to the RPS? We will be using VX-RPS-CH3...
Hello! We are using Extreme Management Center 8.4, V2110 Medium 10.41, Extreme Networks Access Control Engine 8.4, and VMWare 6.5. For whatever reason, when a client connects ...
Hi All, Need your thoughts/advice required; We have couple of old FastEthernet HP ProCurve 48port switches(PoE & non) and Cisco 3750G as the core, with 2Gb uplinks to the core. The current HP s...
Hi, We are testing the XA access swithces to extend our fabric to remote sites, or for more advanced users who work from home who need more than just a VPN connection. Currently, we are running 8.3...
Hi team,
I´m unable recive traps in the XMC server form VSPs, and in the VSP logs I can see:
SNMP ERROR Failed to create trap (Reason=Failed to create v3 trap) for host A.B.C.D:162
An...
The ML-2452-PTA3M3 antenna has three antenna ports and supports MIMO. The AP310 has four (excluding BLE) antenna ports. My question - on which ports of the AccessPoint should I connect the ...
What configuratoin is required to setup NAC to send outbound radius attributes for configuring ERS4900 with FA radius attributes like: dhcp snooping bpdu filtering slpp guard IP-Source Guard ...
Hi, I have the below setup and running into an issue when bringing the MLT up between the two VSP7400’s which are in a V-IST cluster. We have a SMLT created on the V-IST cluster to a single static L...