Network Architecture & Design - Page 4 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

nx5500 attached to the ers 3626

Hi all I am confused how to configure the wlc and ap I have vlan 10 Mgmt on switch and I want to assign the same IP range to my wlc and all ap's example (10.11.10.1-10.11.10.50)I have vlan 13 data vlan that is IP range 10.11.13.1-10.11.13.250I haven'...

Many DHCP scopes on one VLAN segment - it that possible ?

Hello Community ! I am wandering, if the following setup is possible to work: 1. We have a set (let's say 5) of typical /24 subnets. 2. There are separate DHCP pools defined for each subnet on single MS DHCP server. 3. We have a router configured fo...

Resolved! Port Mirroring - K10 Series

Trying to find out a couple of questions. Can the K10 CLI be configured to mirror an entire vlan rather than mirroring each individual port? And are there resource limitations to mirroring most or all of the ports?

Resolved! Access Switches (XA 14xx) in band mgmt solution

Hi,We are testing the XA access swithces to extend our fabric to remote sites, or for more advanced users who work from home who need more than just a VPN connection.Currently, we are running 8.3.1 on the two XA devices. One is at the office, it’s th...

Resolved! Does AP310 supports 802.11r (fast transition)?

I am sure to see this option on the wlan profile settings, but i can't find anything official in the specs?

Top Kudoed Authors

User

Count

4

3

3

3

GTM-P2G8KFN