cancel
Showing results for 
Search instead for 
Did you mean: 

ML-2452-PTA3M3 and AP310e

ML-2452-PTA3M3 and AP310e

_Alex_
New Contributor
The ML-2452-PTA3M3 antenna has three antenna ports and supports MIMO.
The AP310 has four (excluding BLE) antenna ports.
 
My question - on which ports of the AccessPoint should I connect the three connectors of the antenna and which antenna settings do I have to consider for the AccessPoint configuration?
 
I found another similar question - but without an answer: ExtremeWireless (WiNG)
Extremenetworks remove preview
fc76d037715a4a8ab825b521ebe14110_56f1d559-f5e7-4740-a626-d9e19ee1bcd8.jpg
ExtremeWireless (WiNG)
Hi,The antenna guide in page 28 lists all the compatible antennas for AP7522 EMEA.For Patch antennas there is a (*) for ML-2452-PTA3M3-036 which has three(3) co
View this on Extremenetworks >
 
Thanks!
1 ACCEPTED SOLUTION

Ronald_Dvorak
Honored Contributor
Hi, 

I'd say the answer is none of them.

Here the datasheet of the AP which lists the compliant antennas for that AP model.

AP310 datasheet

-Ron

View solution in original post

2 REPLIES 2

_Alex_
New Contributor
At first sorry for the delay, I was unfortunately longer absent.
@Ronald: Thanks for the hint.

Then I ask differently - the AP7522 is compatible according to antenen guide. Where would I connect the antennas there?

Ronald_Dvorak
Honored Contributor
Hi, 

I'd say the answer is none of them.

Here the datasheet of the AP which lists the compliant antennas for that AP model.

AP310 datasheet

-Ron
GTM-P2G8KFN