New Contributor III
since ‎09-07-2021

User Statistics

  • 31 Posts
  • 0 Solutions
  • 2 Kudos given
  • 2 Kudos received

User Activity

Hi,I would like to configure 2 VRFs on a VOSS / Fabric Engine device running 8.10.2.We need to configure the same VLAN numbers in each VRF, ie both will have separate instances of VLANs 10, 11 & 12.Is this possible? If yes, how can I configure it, as...
Hi,We are in the process of replacing a number of S-Series routers with 5520s running FE.We have previously replaced our datacentre core routers with VSPs using SPBM. As our network was exclusively using OSPF before this, the core VSPs ended up runni...
Hi,Is there any actual difference between the following commands:vlan members 1234 1/20vlan members add 1234 1/20 Leaving out add doesn't seem to result is any other VLANs being removed from the port, or any other ports being removed from the VLAN, s...
Hi,I need to verify the MTU on a service provider circuit which is connecting two VSP 7400s.I am getting successful pings despite setting a 'datasize' that I know is too high, so it seems that the packets are being fragmented. There does not appear t...
We have just upgraded from an older version of EMC to XIQ Site Engine. I know the old version was predominantly white, but it has gone to another level and is frankly hurting my eyes.Wearing sunglasses in the office makes the director think I'm hung-...
Kudos from
Kudos given to