New Contributor II
since ‎09-07-2021

User Statistics

  • 10 Posts
  • 0 Solutions
  • 0 Kudos given
  • 1 Kudos received

User Activity

Hello everyone, I have 2 Extreme switches that have following spesification: Software version: EXOS Hardware version: Summit X670 G2 48X I need to make a load sharing on LAG interfaces based on IPv6 headers. When I try to configure load shar...
Hello Every one! I have 2 X670 Extreme switches. I made an ether channel with lacp method for 2(or more) links. In order to load balancing I have chosen CRC-32 and expected to see all traffics of a flow to be mapped to the same ports inside the both ...
Hello everyone! I have an Extreme switch x620-16x. I need to configure lag port according to source OR destination IP address. So I have to configure as the following commands [configure sharing address-based ...] but the OS cann't recognize the [add...
Hello everyones! I wanna buy a x620 extreme switch with 16 10G ports. I need 2 trunk links including 4 ports each as a lacp LAG. The question is can I configure following properties on it or not: 1-Making more than 8 LACP port in a trunk link 2-Dec...
Kudos from