Erwin_van_Hoof
New Contributor II
since ‎09-07-2021
‎08-30-2022

User Statistics

  • 19 Posts
  • 0 Solutions
  • 0 Kudos given
  • 1 Kudos received

User Activity

For a client set-up the vendor requires us to run RSTP on the internal network. The client wants a redundant connection to thier network with MSTP configured. Is it possible running both RSTP and MSTP on the same set-up? 
Hello, At a client we have one Extreme x670_G2 switch running with 3 VLAN's. vlan1 - 192.168.10.129/26 vlan2 - 192.168.11.0/26 Transit - 192.168.11.193/26 Only vlan1 has devices connected (currently), including one server - 192.168.10.133 I want ...
Hello, Problem When using 3 x670_48x switches in a stack (native) at a client, I'm experiencing high stack-port utilization. This reaches 100 percent on certain stack ports. I am using native v160 stacking. The firmware used on these switches is 15....
Hello, At a customer we are using 3 stacks of 3 x670v-48 switches. These are configured native stacking. The multicast used is PIM Sparse mode. In the log file I keep seeing the following message: Slot-2: IPv4 multicast entry not added. Hardware L...
At a client we are using 3 stacks with 3x x670v with XOS 15.4.3 configured with native stacking in V160. Between the 3 stacks we use a 40Gb connection (QSP+ with LACP L2). Each stack makes use of a rendez-vous point. rendez-vous point configuratio...
Kudos from
GTM-P2G8KFN