For a client set-up the vendor requires us to run RSTP on the internal network. The client wants a redundant connection to thier network with MSTP configured. Is it possible running both RSTP and MSTP on the same set-up?
At a client we have one Extreme x670_G2 switch running with 3 VLAN's.
vlan1 - 192.168.10.129/26
vlan2 - 192.168.11.0/26
Transit - 192.168.11.193/26
Only vlan1 has devices connected (currently), including one server - 192.168.10.133
I want ...
When using 3 x670_48x switches in a stack (native) at a client, I'm experiencing high stack-port utilization. This reaches 100 percent on certain stack ports. I am using native v160 stacking.
The firmware used on these switches is 15....
At a customer we are using 3 stacks of 3 x670v-48 switches.
These are configured native stacking.
The multicast used is PIM Sparse mode.
In the log file I keep seeing the following message:
Slot-2: IPv4 multicast entry not added. Hardware L...
At a client we are using 3 stacks with 3x x670v with XOS 15.4.3 configured with native stacking in V160. Between the 3 stacks we use a 40Gb connection (QSP+ with LACP L2).
Each stack makes use of a rendez-vous point.
rendez-vous point configuratio...
Thanks for the information.
In the first article you provide instructions to configure an IGMP snooping filter per VLAN. The example given in the article is that a certain Hardware Limitation of a table has been reached, but that is not the c...