I have a printer in a wired segment with this ip 10.106.2.240/24 and my wireless segment is 10.106.3.0/24 but I can not print, ipforwarding is enabled in both vlans and both are reachable by ping. I have an x250e switch. and AP's are 3825i. Any idea?
Hi, according to this picture, the range of ip's will be given by my controller to my access points for administration? Topologies are set to B@AP mode except a topology named physical. Manual is not to clear for me at this point.
HI, I have an AP with static ip address 10.1.5.2 but in netsight I see the same AP with a different ip address 10.1.5.15. (same mac address and name of the AP) The question is: how can I do to have the same information in both wireless controller and...
i configured as manual says but not catching any packet I'm not sure about what I must configure in the remote port
my remote vlan is RMIRROR vid 555 but is this right:
configure mirror add port 3:18? is this enough? port 3:18 must be empty or mu...