Extreme Networks

Cisco command "snmp-server trap-source GigabitEthernet1 / 0/1" What is the configuration? snmp-server trap-source To change GigabitEthernet1 / 0/1 to an extreme command Please give an example of what command you should use.

flash: /log Directory partition Show allocated capacity command? ex) Linux commands : df -h

Controller-A IP: 192.168.100.1 Controller-B IP: 192.168.100.2 Redundancy: Active - Standby mode Web authentication server: 192.168.20.1 Question: In the above configuration, I wonder what should be entered in the hs_server entry of a separate web ...

Good morning ! I did not speak English and I used Google Translator. Sorry. Image WINGS 5.7.0.0-057R There is a failure. Please check the settings. WM3700 is converted to Morotora image and is in use.The current version is using 5.7.0.0-057R. There ...

I have an AP 4610-ROW but I can't loggin because I don't have user and password. How can I make a password recovery or reset to factory default this AP? altitude How do I reset my 4610 device to CLI mode? If not, please ask your controller how to d...