Hi,I am planning to design an outdoor WiFi area. I will be using an AP on a stick so that I can perform a survey in the design phase (there are a lot of trees that I know will affect RF).I have an Extreme AP560h-FCC that I will configure the radio ch...
Hi,I need to configure NTP or SNTP on all of our switches. They had originally be configured to use SNTP, with the time server being our XMC, but the XMC does not provide this functionality. So I am going to push out a configuration to all our switch...
Hi,
We have two Extreme C5210 wireless controllers running version 10.41.09.0008.
We have 1187 access points.
We are seeing quite a bit of ARP and mDNS traffic on our access points.
We have configured topologies for each of our VLANs.
We do not hav...
Hi, We are trying to configure a lag on a 7100 series switch. We have good experience with creating lags between switches, and ESXi hosts. However, this is the first time we have done this using Microsoft 2012 R2 NIC teaming. On the server, I ...
We have 2 stand-alone, MLAG'ed x670-G2-48x-4q switches. I have purchased 2 more of the same model. We want to convert the stand alone switches to stacks, add a switch to each one, and mlag these stacks.
I realize that when we convert the stand-alone...
Hi T_Pitch,Have you figured out how to accomplish this yet? We just got our 2 ISW 8GBP,4-SFP switches powered on. Unfortunately, we purchased them just over a year ago, so our configuration support via our contract has expired.I did the initial confi...
@Gabriel_GThank you. I knew that I could not enable both NTP & SNTP at the same time, but I was going only on info from the CLI guide. I need to remember to review the user guides as well, since they give some more background to various configuration...
Thanks Eric, Right now, the server is not connected to the switch. The server is not an ESX host. It is a MS 2012 R2 that will serve as a backup repository and tape server, and this is what makes it new to us. Thanks for the commands to get some vis...