HelloFirst of all, my apologies if this question has been solved before.When we test adding a new node to X440G2 stack I realize that the new ports added are no configured properly based on our custom configuration.Is there any way to extend the sett...
Nine month ago I asked for help related to Dynamic Vlans and STP. https://community.extremenetworks.com/extremeswitching-exos-223284/dynamic-vlans-and-stp-7761542
Stephen Williams warned us that STP does not support dynamically created VLANs...
I want to mac authenticate C5 with X450.
In X450 I enabled netlogin mac auth and tested with other X450 but when a connect C5 link is up and nothing happens. RADIUS are not triggered.
Do I need make any configuration in C5?
Thanks in advanc...
We want to replace a Smart Switch 6000 that has attached a C2G124-48 through port 24. Both switches has VLAN created statically.
The new switch is a X450-G2 and VLAN are created dynamically using MAC auth and RADIUS. When we connect a PC or o...
We have this configuration:
create vlan net tag 20
configure net ipaddress xxx.xxx.xxx.xxy 255.255.255.0
configure vlan net add ports 51 untagged
No issues executing ping to another device in xxx.xxx.xxx.0
If we unplug fiber cable and plug it we ...
Dynamic VLANs aren't working in a mixed architecture with old Enterasys and new Extreme devices.
An approach to solve this is using a VSA (211) to create VLANs with MAC auth for every switch.
Without Dynamic VLAN is necessary to create stati...
Authenticating C5 through MAC via Netlogin works perfect. The reason I did'nt find any info in log messages was C5 acts as a passive device and doesn't send any info to port switch connected.
When a device is connected to it or I execute pin...
Netlogin configuration is exactly the same as the link you shared and works perfect for all devices connected (C5 not).
I'm sure BPDU is not part of this issue. I tested BPDU executing command:
configure stpd ports link-type edge edge-safe...