htw
New Contributor III
since ‎09-07-2021
‎08-30-2022

User Statistics

  • 77 Posts
  • 0 Solutions
  • 1 Kudos given
  • 6 Kudos received

User Activity

Hi, XMC 8.4.3: in our device groups for core server switches one of the switches has poll status “ZTP+ staged” and poll details “Configuration staged for device.” Additionally as firmware version an older version is shown. If I do a “rediscover” fo...
Hi, we want to deploy a 802.1x wifi and a guest network on APs which are controlled by an ECA HA pair. Two NACs will handle 802.1x authentication for 802.1x wifi. In "NAC Manager" we have an appliance group with those two NACs and in "switches" tab b...
Hi, following scenario: - two AccessSwitchstacks X450-G2 (22.4), each connected with an MLAG to a pair of Summit X620 Distributionswitches. (X450 <=> X620 <=> X450) - VLAN A is configured in all Switches - VLAN B is configured in X620 and dynamically...
Hi, with EOS I can use "show port advertise" to see the advertised speed of a network device which is connected to the switch, f.e.: SWITCHNAME(su)->show port advertise ge.1.5 ge.1.5 capability advertised remote ---------------------------...
Hi, we are using NAC to assign policies and a location-dependent VLAN-ID for untagged VLANs on our User ports (Summit x450-G2- and Enterasys G3-Switches). So we have at Control / Access Control / Configuration / Policy Mappings a policy mapping table...
Kudos given to