i have configured port channel on my cisco and extreme switch but when i connect the interfaces the port channel doesnt come up not sure what i am doing wrong here. please see configuration
Hi Guys im trying to configure radius auth to my extreme switch stack this is logs i get on the switch.
Slot-1: authentication server for management-access is not initialized
11/01/2017 14:58:23.74 Slot-1: Login failed due to invalid username/pa...
you will need a licence to activate the 10g speeds i cnt remember exactly which licence i think its edge but m not sure someone can better point which licence to use for 10 g speeds and any other additional features you may want
The main advantage of stacking is that you get to take several individual switches and configure them and treat them as a single logical switch instead of as several independent individuals..
Also, depending on the particular switches and ...
I am Luthango and i am a Jnr Network engineer from south africa, I am very new to extreme as i come from a cisco background. I am pretty excited working with extreme switch for the last year till now. I really like the extreme produc...
you can use the below commands to see if there is RX or TX errors
sh port rxerrors port-number
sh port txerrors port-number
for a specific port use like this
sh port 1:2 txerrors
sh port 1:2 rxerrors