X450, The MGMT port at back and a vlan I have created on the box are using the same mac address
I'm not interested in the rites and wrongs of this I have my reasons for patching this together
but they use the same MAC
I'm looking to change the mac ...
I'm attempting to configure a simple PoC for Pim Sparse mode on a pair of X250 switches,
I've enabled trial licences, and A RP is elected .
Everything looks ok but my RP never forwards traffic downstream
Any thoughts ?
MSM-A mcmgr n/a n/a 6.2 38.1 33.1 32.6 32.8 45.5 175756.29 223851.09
Does anyone know what process this is ?
it seems to be running high.
I wonder if this could be multicast, on a different customer I rece...
I have a question
For a customer I have these options
Between the 2 MLag switches are these options
A 2 port aggregation of 1 gig links
A single 10 gig link ( a newer network )
So the trade off I have...
Problem is if you were to capture egress and ingress on every port in a vlan, you would see every packet twice. I'm not sure how if the extreme captures traffic being routed internally on vlan ( does that count as a port ) would be good if someone he...
With Spanning tree the port will block, obviously the unmanaged switch will be down until the loop stops. ELRP does work well but in my experience customers forget where its configured or configure it on uplinks by mistake, resulting in the " every n...