New Contributor III
since ‎05-02-2023

User Statistics

  • 21 Posts
  • 2 Solutions
  • 7 Kudos given
  • 1 Kudos received

User Activity

Hello Experts,I'm configuring the TACACS+ on the VDX switch and I was able to configure 'aaa authentication and aaa accounting' but did not find an option to configure authorization even though I have configured the tacacs+ host. extreme01# show runn...
Hello Experts,I see below two routes v6 on the switch, I did not configure them but it's there even after wiping the config.extreme01# show ipv6 route IPv6 Routing Table for VRF "default-vrf"Total number of IPv6 routes: 2'[x/y]' denotes [preference/m...
Hello Experts,Does VDX support PBR with IPv6.I have configured IPv6 standard and extended ACL , matched them in route-map then set ipv6 next-hop lastly applied route-map to the interface but traffic is not being routed as per policy. So want to confi...
Hello Experts,I have created the below PBR but it is not working as per expectation.Configuration :===========rbridge-id 1route-map PBR_TEST permit 10match interface te 1/0/3set ip next-hop ip route 192...
Hello Experts,Does VDX support IP SLA feature?If yes then can I get config guide or steps to enable it -Pavan Pawar
Kudos from