Hi,does anyone have any idea how this Cisco configuration works on an S6 chassis?ip sla 1 http raw http://<IP> timeout 5000 threshold 500 http-raw-request GET http://gateway.<Cloud Name>.net/vpntest HTTP/1.0\r\n User-Agent: Cisco IP SLA\r\n e...
Hello,
Does anyone know where the log for the Netsight v8.1 operations are stored?
I need the log if the trap receiver was registered or unregistered at a switch.
Thanks for your help
Alexander
Hi,
does anybody know what happens with the clients of a dual stack if the stack is broken and we have a split brain situation with two master? We use the X440-G2 Switches with 22.6 EXOS conneced to MLAG Peers.
Is there a solution to keep one of th...
Hello,
how can i configure a trap for an ospf neighbor change?
Mib-View is added:
#configure snmpv3 add mib-view "All" subtree 1.0/00 type included
Other traps were reached by Netsight.
Thanks,
Alex
Hi,we have tried this configuration at the EOS Switch:This sould be a L7 Check. Open a connection to 172.21.58.146 via GRE Tunnel and then checks the http request.But if i map the probe to the tunnel interface the tunnel goes immediately down. pro...
Thanks for your answer.
Yes every slot has one uplink to one MLAG Peer with LACP.
Sure that one slot will working well, even though the Slots have the same IP and Stacking MAC?
I think the MLAG Cores will become in trouble because of that.
Hi Nikolay,
thanks for your answer.
We have configured the upm profile and log event according to the gtac articel.
Do we have to additionaly adjust the snmp configuration for the trap to be send to the netsight? (We already configured the switch ...
