adf10
New Contributor III
since ‎09-07-2021
‎02-02-2024

User Statistics

  • 21 Posts
  • 1 Solutions
  • 4 Kudos given
  • 0 Kudos received

User Activity

I have an AP410C-1-FCC, Console port is a micro USB port.  When trying to connect to Windows it reports Unknown USB Device (Device Descriptor Request Failed). I did try with different USB ports, and diferent computer always with the same result.  Her...
Hello Community,I have a group of AP410i deployed on an office building, with Radio1 configured on 2.4Gz , Radio2 on 5Ghz and Radio3 enabled and configured as sensor. Some APs reports Radio3 in State OFF like this:But some of the APs reports Radio3 a...
Hello community,I'm trying to configure AP410i to disconnect clients that falls below -75db, but in wireless configuration I cannot find any settings related to minimum signal strength, signal threshold or similar.Can anybody point me in the correct ...
I have an AP7532 which does not boot, connecting with the console it reports Error message: Wrong Image Format for bootm command", "ERROR: can't get kernel image!"  as you can see here:ErrorI've waited or max failed attempts but it does not happen.  ...
HelloWe have a warehouse with 133 APs (mix of AP6521, AP7522 and AP7532) connected to RFS4000 controller running WiNG OS 5.9.1.10, we have 2 SSIDs active on different VLANs tunneled to the RFS4000 and sent to the core switch via physical ports.We had...
Kudos given to
GTM-P2G8KFN