Header Only - DO NOT REMOVE - Extreme Networks

EOS CLI commands.


Userlevel 3
Need EOS CLI commands for ECE requalification.

Having just failed my ECE online examination , partly due to not touching the old Enterasys hardware basically ever.. I am after a document re that systems generic cli , giving basic commands ..

The other thing that has wound me up , is that of all the studying I did , based on my EOS knowledge and the " online guides" there are many questions , that are not covered on the course , ERPS for example is one, also slot configurations on a stack EOS.. even searching the web , had little success. Anyway moan over , if someone can direct me to a decent EOS cli document it would be appreciated.

2 replies

Userlevel 4
Hi Rob,

Please check the Post Sales training page on the PartnerNet there is a full EOS Course available for free to the Partners, this is the same materials that was required for the initial ECE-Networking certification. This will contain the information that was presented on the Recertification Exam.

Suzanne
Userlevel 3
Suzanne Barnett wrote:

Hi Rob,

Please check the Post Sales training page on the PartnerNet there is a full EOS Course available for free to the Partners, this is the same materials that was required for the initial ECE-Networking certification. This will contain the information that was presented on the Recertification Exam.

Suzanne

Hi

I have access to the web site , though I cannot see the free EOS course

Reply