I need to make my AP’s black on the outside instead of white. I’ve been looking at using black duct tape, heat shrink tape, or something similar. Any suggestions? Will certain tapes hinder wifi signal or void warranties?
Best answer by Ronald Dvorak
Hi,
here a article from the KB…
You’d also Google “paint access point” do find some information.
We’ve done that back in 2007 for a customer - I’ll check whether I’d find some old mails with details.
-Ron
You might want to delete this post and re-post in one the wireless sub-groups.
WING, Identifi, or XIC.
It will most likely get more views in there.
Hi,
here a article from the KB…
You’d also Google “paint access point” do find some information.
We’ve done that back in 2007 for a customer - I’ll check whether I’d find some old mails with details.
-Ron
We used couloured foil/lamination. That worked perfect and you won´t loose warranty because you can pull the foil off.
br
Volker
I’ve seen several “vanity covers” for different vendor access points that are usually a plastic shell that clips over the AP. I thought I had seen universal cloth covers, but I’m having trouble finding them now. Id imagine this is something you could have a seamstress or upholstery shop manufacture for relatively cheap. Thinking of something akin to the stretchy chair covers they use at weddings and conferences.
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
