HI
When am connet the ap sonicwall site to site vpen remot its showing this log
Wireless AP automatic software upgrade/downgrade has failed. May be a corrupted image was selected as a default. Please select another default image. This alarm will repeat while the system is in automatic mode: Wireless AP SN 14210748915V0000; failed image 09.12.01.0067.
Could you provide more information so I'd turn on my glass sphere....
- AP model
- is the tunnel from the AP to the controller a ....normal tunnel, control tunnel encryption, or both data/control tunnel encryption
- have you tried to reduce the AP MTU to 1300
- are all the required ports open on the VPN link i.e. FTP 69 both directions
- if you turn off AP automatic software upgrade is the tunnel stable to the AP
- AP model
- is the tunnel from the AP to the controller a ....normal tunnel, control tunnel encryption, or both data/control tunnel encryption
- have you tried to reduce the AP MTU to 1300
- are all the required ports open on the VPN link i.e. FTP 69 both directions
- if you turn off AP automatic software upgrade is the tunnel stable to the AP
Hi Ronald,
The AP modal WS-AP3705i
We open all the ports on the VPN both direction and the tunnel from AP to controller is normal tunnel.
The AP modal WS-AP3705i
We open all the ports on the VPN both direction and the tunnel from AP to controller is normal tunnel.
Reply
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.