ExtremeXOS Copyright (C) 1996-2015 Extreme Networks. All rights reserved. This product is protected by one or more US patents listed at [url=http://www.extremenetworks.com/patents]http://www.extremenetworks.com/patents[/url] along with their foreign counterparts. ============================================================================== Press the or '?' key at any time for completions. Remember to save your configuration changes. X450e-48p.1 # show log 10/17/2018 13:48:40.71 [i] Login passed for user admin through serial 10/17/2018 13:48:37.78 [i] Power usage monitoring not supported for PSU (Part name Internal Power Supply ) in slot 1 10/17/2018 13:48:37.78 [i] Input voltage to Internal Power Supply is on. Output enabled. 10/17/2018 13:48:37.78 [i] Internal Power Supply is present. 10/17/2018 13:48:22.02 [i] Media UTP is inserted into Port 50 10/17/2018 13:48:21.87 [i] Media UTP is inserted into Port 49 10/17/2018 13:48:19.36 [i] Switch is operational 10/17/2018 13:48:19.30 [i] Beginning polling the option card for slot 1 10/17/2018 13:48:13.87 System is stable. Change to warm reset mode 10/17/2018 13:48:11.14 [i] Watchdog enabled 10/17/2018 13:48:09.95 Node State[3] = OPERATIONAL 10/17/2018 13:48:07.51 [i] DOS protect application started successfully 10/17/2018 13:48:06.45 Node State[2] = STANDBY 10/17/2018 13:48:06.45 [i] Node INIT DONE .... 10/17/2018 13:48:04.98 Node State[1] = INIT 10/17/2018 13:48:04.73 [i] Hal initialization done. 10/17/2018 13:48:03.18 [i] snmpMaster initialization complete 10/17/2018 13:48:03.09 [i] **** tftpd started ***** 10/17/2018 13:48:03.00 [i] **** telnetd started ***** 10/17/2018 13:47:59.63 [i] Network Login framework has been initialized 10/17/2018 13:47:58.29 [i] snmpSubagent initialization complete 10/17/2018 13:47:51.92 [i] Starting hal initialization .... 10/17/2018 13:47:50.40 [i] telnetd listening on port 23 10/17/2018 13:47:40.85 DM started 10/17/2018 13:47:40.76 The Node Manager (NM) has started processing. 10/17/2018 13:47:39.92 EPM Started 10/17/2018 13:47:38.54 Changing to watchdog warm reset mode 10/17/2018 13:46:27.16 Shutting down all processes 10/17/2018 13:46:26.93 Rebooting with reason User requested switch reboot A total of 29 log messages were displayed. X450e-48p.2 # show stacking-support Stack Available Ports Port Native Alternate Configured Current ----- ----------------- ---------- ---------- 1 Yes 49 * Alternate Alternate 2 Yes 50 * Alternate Alternate stacking-support: Disabled N/A Flags: * - Current stack port selection X450e-48p.3 # show stacking Stack Topology is a Daisy-Chain This node is not in an Active Topology Node MAC Address Slot Stack State Role Flags ------------------ ---- ----------- ------- --- *00:04:96:27:9a:26 - Disabled Master --- * - Indicates this node Flags: (C) Candidate for this active topology, (A) Active Node (O) node may be in Other active topology X450e-48p.4 # show version Switch : 800190-00-05 0707G-00725 Rev 5.0 BootROM: 1.0.3.5 IMG: 15.3.5.2 XGM2-2bt-1 : 800255-00-02 0926G-00853 Rev 2.0 Image : ExtremeXOS version 15.3.5.2 v1535b2-patch1-8 by release-manager on Sat Aug 15 13:02:55 EDT 2015 BootROM : 1.0.3.5X450e-48p.5 # show switch SysName: X450e-48p SysLocation: SysContact: support@extremenetworks.com, +1 888 257 3000 System MAC: 00:04:96:27:9A:26 System Type: X450e-48p SysHealth check: Enabled (Normal) Recovery Mode: All System Watchdog: Enabled Current Time: Wed Oct 17 13:55:21 2018 Timezone: [Auto DST Disabled] GMT Offset: 1 minutes, name is cet. Boot Time: Wed Oct 17 13:46:57 2018 Boot Count: 91 Next Reboot: None scheduled System UpTime: 8 minutes 24 seconds Current State: OPERATIONAL Image Selected: primary Image Booted: primary Primary ver: 15.3.5.2 patch1-8 Secondary ver: 15.3.5.2 Config Selected: primary.cfg Config Booted: primary.cfg primary.cfg Created by ExtremeXOS version 15.3.5.2 142014 bytes saved on Wed Oct 17 13:46:22 2018 X450e-48p.6 # [/code]