Aerohive Migrated Content - Page 233 - Extreme Networks

Aerohive Migrated Content

Questions and discussions related to old aerohive products migrated over

Forum Posts

Sorted by:

Start a conversation

When the AP's were first installed, they had a primary and a secondary APO for Radius access. Is that the default or should all AP's have the radius enalbed?

When the AP's were first installed, they had a primary and a secondary APO for Radius access. Is that the default or should all AP's have the radius enalbed?

Problems with HiveManager Webinterface

I installed a new HiveManager VM (on Premise / 19.5.1.7-NGVA) and tried to set it up. 1) I cannot install an SSL CertificateI created a CSR converted it to BASE64 format with OpenSSL signed it with our internal CA and tried to upload the .cer file i...

Is there a quick way to limited SSIDs to specific APs?

I want to limit an SSID to only 3 out of 50 APs. I found the option in the interface settings of each AP to toggle on/off each one. Do I have to do this for every AP or is the a quicker way? (I have tried selecting multiple but the SSID toggle optio...

Cannot deploy new policy to AP130 and AP1130. HiveOS is 6.5r4 because anything newer causes continual reboots of access points

Cannot deploy new policy to AP130 and AP1130. HiveOS is 6.5r4 because anything newer causes continual reboots of access points

Allow snmp on eth0

I'm trying to allow snmp on AP130's. I know the command but I'm not sure how to configure it via hive manager classic 8.1r2 In other words I'm looking for hive manger setting that is equivalant to interface eth0 manage snmp command Thanks

Top Kudoed Authors

User

Count

4

3

2

2

1

GTM-P2G8KFN