Checking RIB and FIB on Brocade 2024?

[matty]

Hello, can anyone confirm the correct way to check the RIB and FIB on Brocade 2024? Wanting to ensure i’m not over recommended capacity, chasing memory problems….

Is it:

RIB - show ip route

FIB - show ip BGP

?

[joergkost]

Ah sorry, missed the 2024 in the subject. For the CER you need to rconsole into the lp:

SSH@rt1# rconsole 1
Remote connection to LP slot 1 established
Press CTRL-X or type 'exit' to disconnect it
LP-1>show cam-partition usage

[matty]

Brocade CER 2024 - Part #: 40-1000859-13

[joergkost]

What is your hardware model?

[matty]

Hmm I don’t seem to have cam-partition usage, my show cam options...:

show cam ?
  l2acl                  Show cam Layer 2 sessions
  l2out                  Show cam Layer 2 outbound
  l4                     Show cam Layer 4
  l4out                  Show cam Layer 4 outbound
  v4sacl                 Show cam IPv4 Super ACL
  v6acl                  Show cam Ipv6 sessions
  v6out                  Show cam Ipv6 outbound
  v6sacl                 Show cam Ipv6 Super ACL 

show ip route works well:

#show ip route

Total number of IP routes: XXXXXX