Hello Experts,
I'm exploring the PBR route-map set and match options to use them in production and I see switch has a lot of flexibility in terms of match and set :
extreme01(config-rbridge-id-1)# route-map DC_PROD permit 12
extreme01(config-route-map-DC_PROD/permit/12)# match ?
Possible completions:
as-path IP AS Path Access Lists.
community Community Access List Name.
extcommunity Match BGP/VPN extended community list
interface Interface name, maximum 3 interfaces supported
ip Internet Protocol (IP).
ipv6 Internet Protocol (IPv6).
metric Route metric
protocol Match route on protocol type and sub-type.
route-type Route type.
tag Route tag.
vrf VRF name
extreme01(config-route-map-DC_PROD/permit/12)# set ?
Possible completions:
as-path Prepend string for a BGP AS-path attribute
automatic-tag Automatically compute TAG value
comm-list BGP community list for deletion
community BGP community attribute.
dampening BGP route flap damping
distance Set Admin Distance for matching OSPF routes
extcommunity BGP extended community attribute
ip Internet Protocol (IP).
ipv6 Internet Protocol (IPv6).
local-preference BGP local preference path attribute
metric Metric value for destination routing protocol
metric-type Type of metric for destination routing protocol
origin BGP origin code
tag Route tag
weight BGP weight for routing table
But then I referred Extreme Network OS Security Config doc which only talks about the below options
- Select the next-hop gateway.
- Set the DSCP value.
- Send the packet to the null interface (null0) to drop the packets.
So wanted to know what options we support.
-Pavan Pawar
