cancel
Showing results for 
Search instead for 
Did you mean: 

New Documentation Published March 19th-25th!

New Documentation Published March 19th-25th!

SamPirok
Community Manager Community Manager
Community Manager

Our support teams published 50 new articles last week! Check out the new titles below!

 

All

SA-2023-032 - AMI-BMC User Enumeration (CVE-2022-2827) 

SA-2023-031 - AMI-BMC Default Credentials (CVE-2022-40242) 

SA-2023-030 - AMI-BMC Redfish Arbitrary Code (CVE-2022-40259) 


Campus Fabric Articles

5520: IST-paired switch crashed after partner was upgraded and IST links re-enabled 

ISIS Adjacency not forming between new switch and core site 

Switch Not Reachable Via SNMPv2 

Universal 5520 Fabric Engine - Not able to see the device connected to the switch and no MAC is lear... 

VOSS – Loss of Routed Traffic After Site Power Outage or ISP Link Bounces 

ERS: TFTP Backup to XMC not working. Backup is being sent via incorrect interface 

Path to upgrading VOSS switches from older version to latest supported version. 

VSP 7400 Rebooting At Same Time Daily

 

Data Center Articles

FABS-5025 and PLAT-5013 being logged continuously prior to outage 

VDX6740T: unexpected reboot 

40 Gig interfaces not coming online after reboot. 

Microsof Network Load Balancer not working in an EVPN Network with SLX switches as gateways 

How to drop BPDU on an interface? 

SLX 9850 crashed and went into a boot loop after creating monitor session 

SLX9540 - After upgrade to 20.2.3j some ports do not pass traffic 

IPv6 anycast addresses unreachable on VDX running 7.4.1 

Unable to SSH via inband management port to SLX 9540 after upgrading to 20.4.2b 

Incorrect EVPN Nextnop and BCM Errors causing traffic loss 

Calico-kube-controller pods are restarting continuously. 

Lincard 2 in 9850 crashed and came back up 

Processor reloaded - Software Fault:Kernel Panic

 

EXOS Articles

Will there be any impact if I upgrade the EXOS software from 22.4.x to 22.7.4 

"Could not install proto filter" errors seen in EMS log 

Stale PIM cache entry when Anycast RP is configured 

25G uplinks fail to come up after an upgrade to 31.7/32.x 

VPEX controlling bridges periodically reboot due to memory depletion 

Silent device not authenticating


Legacy Articles

What is the difference between Wi-Fi 6 and Wi-Fi 6e?

 

SD-WAN Articles

Why is my configuration not updated on the ip|engine? 


Universal Articles

BGP status monitoring using SNMP 

Factory default state phones are not able to obtain IP addresses. 

SNMPv3 User config via ZTP 


WiNG Articles

AP360i/e installation and mounting kit information 

Why post upgrade to new firmware client count is wrong? 

[XIQ][WiNG] WiNG -1 SKU APs adopted to WiNG controller are not displayed on XIQ device page 

Why I'm not able to create new AP profile on wing 7 ? 

iMAC and M2 Macbook pro keep disconnect&reconnecting to WPA2 preshared key ssid 

What are the possible formats of SNs for WiNG APs? 

How to Enable/Disable wpa-wpa2 key-rotation from Command Line Interface (CLI) 


XIQ Articles

WiNG - Is it possible to integrate XIQ Guest Essentials with WiNG? 

Changes to IP Firewall Rules are not being saved 

[XIQ Alerts BETA] Device temperature alert displays incorrect current temperature. 

Is there a method to Export and/or Backup AP Configurations via XIQ Pilot? 

Where to find reauthorization time setting in XIQ 

[XIQ] Unable to access data issue on VA2 RDC. 

Where to find information about Co-Pilot licenses? 

Does XIQ Companion mobile APP support WING APs? 

 

If you have any requests for new articles, please let us know! You can either comment on this post, or email me directly at community@extremenetworks.com.

0 REPLIES 0
GTM-P2G8KFN