cancel
Showing results for 
Search instead for 
Did you mean: 

Network Login 802.1x user VLAN(s) "unknown" on 460 G2 switch with EAC

Network Login 802.1x user VLAN(s) "unknown" on 460 G2 switch with EAC

Justsomebodi
New Contributor III
Hi All

Does anyone know why my Radius authenticated users has an unknown VLAN in the switch logs? It does not happen this way on a G1.

Network Login 802.1x user host/justsomebloke logged in MAC F0:C7:19:5E:26:C9 port x:x VLAN(s) "<unknown>", authentication Radius

Thanks
7 REPLIES 7

Karthik_Mohando
Extreme Employee

OscarK
Extreme Employee
If the vlan attribute is returned as a policy you will see unknown vlan in the switch log. As the switch only sees a policy being returned and not a Vlan VSA. the vlan is applied by policy and not by login.

Justsomebodi
New Contributor III
Yep Extreme Policy is set for both.

Ronald_Dvorak
Honored Contributor
OK so Extreme Control is also included - how about the switch settings in Control - are they the same for the switches in the Policy/VLAN column...

bf829e24cbc84facb2b433d3c6ba09f5_RackMultipart20180109-94237-15v3oq-NAC_switch_overview_inline.png



GTM-P2G8KFN