cancel
Showing results for 
Search instead for 
Did you mean: 

AP LLDP Neighbor not shown in XiQ under Manage->Device

AP LLDP Neighbor not shown in XiQ under Manage->Device

mileagainst
New Contributor

Hi everyone,

i have an issue that for some APs LLDP informations are not being shown in the overview window "Devices". When i click on that AP and window of that AP opens, over there is shown completely normally. Screenshot 2022-11-25 145204.jpg

Screenshot 2022-11-25 145238.jpg

What can be the reason for this and how to solve it?

Many thanks in advance!

3 REPLIES 3

w1f1n00b
Contributor II

I've had this issue for quite some time and just accepted it as an Extremeism. Where you able to get to the bottom of it?

Curious if you're using Eth0 and Eth1 to patch in APs?

mileagainst
New Contributor

I have seen that topic already, but it is not related to my issue as i dont't use Suplemental CLI

Wiamsde
New Contributor

AP510s are not showing any LLDP information in the XIQ Device Monitor window - due to no LLDP information in the AP LLDP neighbor table.


@mileagainstCFA Home wrote:

Hi everyone,

i have an issue that for some APs LLDP informations are not being shown in the overview window "Devices". When i click on that AP and window of that AP opens, over there is shown completely normally. Screenshot 2022-11-25 145204.jpg

Screenshot 2022-11-25 145238.jpg

What can be the reason for this and how to solve it?

Many thanks in advance!




GTM-P2G8KFN