ExtremeSwitching (EOS) - Page 27 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

Resolved! SK8008-1224-F8 fabric module replacement on bonded S4 chassis

Hello everyone, I need to replace faulty SK8008-1224-F8 module on bonded S4 chassis. The module has 4 dedicated VSB ports. Here are my questions: Is there any procedure for such replacement ? Do I have to configure VSB bonding option again in newl...

Vlan Voice

code:Hello,I have three switches, 1 210-24p-GE2, 2 210-48p-GE4 and I need to cascade the 24-port to the 48, but at the time of doing so and connect a phone on the 24-port switch the phones do not receive ip addressing and if I connect a phone to the ...

800-Series Web Interface/Telnet

I've followed these instructions to reset the password and can console into the device without a problem, but try as I might I can not access the device via the web interface or telnet. Is there some trick I'm missing? Thanks https://community.extr...

Resolved! 7G4270-12 & MGBIC-LC04 not working

I have a problem to get a 100 Mbit SFP MGBIC-LC04 working in an old 7G4270-12 DFE-module. I get no link. When I tried to configure the port for 100 Mbit I got error message: ss097a(su)->set port speed ge.7.12 100 default speed 100 mbps no...

Legacy A2H124 switch voip vlan prioritization

Hi, I searched for VLAN traffic prioritization on GTAC knowlegebase and found these commands: set policy profile 1 name "PriorityForPhones" cos-status enable cos 5 set policy rule admin-profile vlantag 10 admin-pid 1 These commands gives "cos 5" p...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN