ExtremeSwitching (EOS) - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

Deny DHCP on certain ports

I have an extreme switch that is connected back to a Cisco core. switch that does all the routing. Users attached to the Extreme switch are able to utilize DHCP. However, I now have another "unmanaged" switch that sits off port 22 on this Extreme S...

Relocate a switch from one stack to another.

I need to relocate a X450G2-48p from one stack/IDF to a different stack/IDF in the same building.I would like the configurations and vlans from the new location to replace the old.

Resolved! 7520-series GA time

Hi Sirsfor universal 7520 series I have some questions .GA time of 7520-48Y-8C & 7520-48T-6C is July-2023 , but GA time 7520-48YE-8CE is Nov-2023 ,so GA time of 7520-48Y-8C & 7520-48T-6C is still July ?Why is there a need for an additional device th...

Summit X650-24x 10g optical connection not active

Hi Experts:The 10g optical link from our device to port 1 and 2 are not active. We have done the self loop test on both our device and the switch, the lights are all on. But when connect our device to the switch, the lights is off, and the "show port...

Resolved! EXOS Stack Inter-VLAN routing configuration question

So our main stack consists of X460G2 stack master and some X440G2 between the master and couple of more X460G2. The system stacking is a ring using the 460G2 vim modules and the X440G2 rear stacking ports. The X440's also have dual 10GbE licensing...

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN