cancel
Showing results for 
Search instead for 
Did you mean: 

snmpset to clear ARP table entry on the s4 Enterasys SW

snmpset to clear ARP table entry on the s4 Enterasys SW

Claudio_Sao_Pau
New Contributor
I am trying to remotely clear one entry in a ARP table of the s4 Enterasys SW using the following command snmpset -v2c -c 1.3.6.1.2.1.4.22.1.4.108.204.136.234 i 2, but it shows an error: "Error in packet." Reason: commitFailed. It works with other models such B5G124-48.
1 REPLY 1

Matthew_Hum
Contributor
in that command you failed to include a community (-c) and IP. if these were omitted intentionally then can you check the snmp section within the S4 to verify you have read/write access?
GTM-P2G8KFN