cancel
Showing results for 
Search instead for 
Did you mean: 

ERS 4xxx EAPoL (802.1x) Commands

Jay6
New Contributor
Thought I would share the EAPoL commands for ERS4xxx switches.
ERS4xxx EAP/802.1x config template

conf t
radius server host
3 REPLIES 3

David3
New Contributor
In the above configuration, what is the ERS 3xxx equivalent to the command "radius-server encapsulation ms-chap-v2"?

There is no equivalent command for 3xxx series. the default encap is PAP for 3xxx.

Chad5
New Contributor III

Hi,

 

I am trying to setup the ERS 4800 to try authentication on a port, but not to block if authentication failed, and just use the VLAN configured on the switch in case of failure (I can do this on EXOS). I guess I can use guest vlan or failopen vlan but that means I have to specify the guest/failopenVLAN for every port instead of just using the VLANs already on ports.

 

Is that possbile?

 

Thanks,