ExtremeSwitching (EXOS/Switch Engine) - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Summit X440-24P does not boot up properly!!!

I have a Summit X440-24P switch, recently when i turn it off and turn it on tomorrow it boots up to factory default despite the fact i have primary.cfg configured as my active configuration and image secondary has been configured my active image by U...

x690 new logspam since upgrading to 32.7.2.19-patch1-32

We have two x690 stacks at our core that were running an old version 22.1. We upgraded to 22.6.1.4 and then 32.7.2.19 patch1-32.Everythings working fine but theres these new logspam entries.On the second core stack this is repeating:05/01/2025 09:13...

High Fan Noise

All these below switch models make very loud fan noise. what is the solution to reduce the noise? Summit X440-48t Summit X440-48t Summit X440-24p Summit X440-48p

Resolved! X440-G2-24p Fan Speeds

What is the go with the X440-G2 fan speeds. We have some of these switches in class rooms and cabinets in classrooms and they are so noisy. We also have some in one of our data centers and its at a much much lower temp, but the same fan speed? Offic...

X460 reauth/CoA from Forescout

Hi, does anyone have any experience with reauthentication commands issued from Forescout appliances? I've confirmed that the Forescout appliances are sending the reauthenticate command with the relevant info to the switch, but the switch doesn't seem...

Top Kudoed Authors

User

Count

28

27

20

20

17

GTM-P2G8KFN