ExtremeSwitching (EXOS/Switch Engine) - Page 128 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

5520 switch, 1gbps optics in VIM, connected but no IP connectivity

I have a new 2 switch stack of 5520’s each with VIM-4X in the right side. I have 2 10gbps fibers that work perfectly in a load sharing to connect to another floor, and 2 Active Twinax to a vmware server in a load sharing link working perfectly.I hav...

Resolved! EW TAC & OS Summit - Information

Where can I get information on the scope and SLA of the EW TAC & OS Summit support?

problem with Config Booted on summit x450-g4

when i configured switch this save configuration but if the switch reboot lost the configuration, i can see this configuration in the switch: information on SW #################### Slot: Slot-1 * Slot-2 ...

Help to create a Lag LACP between X690 and HP

Hello Guys, i´m having problem to create a Lag lacp between an Extreme X690 and a HP, without the lag i can ping the HP, but i need to create a lag lacp to get 40G, follow below the config from my X690, does anybody know what could be? thanks.configu...

Resolved! disable iqagent | 30.7.1.1 patch1-54

Hi there,i just have one simple question. maybe 2 its about this log: clearflow iqagent: enable dhcp vlan Mgmt i understand the iqagent is trying to connect tio xiq, which our customer does not use/need. So i found this .xmod: summitX-30.7.1.1-patch1...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN