ExtremeSwitching (EXOS/Switch Engine) - Page 149 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! ACL on G2 to only allow one IP address to connect

I need to restrict access to my IP cameras from one IP which is 10.10.10.104/24I have 8 IP cameras and I’m just trying to get this working with one for now.I have the following to allow it and that obviously works, but I cant figure out the else if/e...

Resolved! ExtremeXOS log message UNKNW:????.

I’m seeing these log messages on our Extreme X690 switches.04/14/1970 22:00:34.20 <UNKNW:????.1332>04/14/1970 03:48:18.20 <UNKNW:????.1306>04/14/1970 03:48:18.00 <UNKNW:????.782>01/19/1970 04:54:26.00 <UNKNW:????.795>01/19/1970 04:54:26.00 <UNKNW:???...

Resolved! Initial setup x460-G2

I am trying to disable the Default vlan but there must be something that I am missing.I have found a few guides online and in these forums as well, but I must be missing something.I have done the following:configure vlan Default delete ports alldisab...

Is there a reliable OID that can be used to reliably grab a switch model. Stacked or standalone?

I’m curious to know if there is a consistent method of always getting the proper model of an EXOS switch via SNMP. We use Auvik and we get really unreliable results from the Make/Model field. When units are stacked, we get “SummitX stacking” or somet...

Resolved! EXOS: use case for "port groups"

Today i stumple about the following EXOS cli command: create ports group port_group CLI Reference mention this: This command creates a generic port-group name that can be associated with a list of ports. The port_group option could be ...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN