Just set up MVRP for the first time. The problem I’m having is that it keeps the VLAN name (alias) on the switch where it’s defined, but on the other switches it just shows a generic “SYS_VLAN_###” name. Is there any way to retain the alias on the ot...
We’re getting ready to refresh a significant number of edge closets and are looking to change up a few things. Our primary goals are:Support 2.5/5gbps links for our WAPs.Reduce/eliminate total downtime of the wired network and wireless networkSave mo...
When i telnet to extreme switch it asks for password first.Rather than asking for Username/Password.Escape character is '^]'. telnet session telnet0 on /dev/ptyb0 password:
Dear All Expert, I’m facing this issue the access port is suddenly down. And my client told me the EAPS ring is down. And I am not sure is the ring down cause the access port devices down also. And I hope get heard some advice from the expert at here...
I have test VPLS service as below design CE1------>>PE1------>>P1-------->>P2-------->>PE2--------->>CE2 PE1 and PE2 are spoke router P1 and P2 are core router I have configured vpls spoke to core between PE1 and P1 , PE2 and P2P1 and P2 has vpls c...
