ExtremeSwitching (EXOS/Switch Engine) - Page 184 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

SSH access not working on summit x440 with 16.2.5.4 -pathc-13 firmware version

Hi, everyone I have ssh enabled on my x440, I have restarted processes and also re enable ssh2, and still cannot access via ssh. I have issue this comands “restart process exsshd” and also “restart process thttpd” and still cannot access...

Resolved! X440-G2 or X450-G2 as access switch?

Hi! Would the X440-G2 be a suitable access switch in a large network? Segmentation is OK so most places where these would sit have some 15 VLANs and a total of max 2500 MAC addresses. The X440 (non-G2) was not a very good switch in these situations w...

Error on downloading 30.6 file for 440G2

I get this error - Error: Failed to download image - Image signature cannot be validated. - on the file summitX-30.6.1.11-patch1-2.xos for the 440-G2. The non-patched version works ok.

Port-based VPLS

Hi,I’ve successfully setup a VPLS tunnel between 2 hosts via 2 switches thanks to this doc:https://extremeportal.force.com/ExtrArticleDetail?an=000081349But in this case, I can only pass a single client VLAN per service.I would like to be able to pas...

Provide support for stacking nomenclature when not stacked

Maybe it’s there and I’m missing it. I would LOVE to have EXOS give you an option to use stacking nomenclature on non-stacked switches! We enable stacking all of the time, just to keep our configs consistent regardless of the environment we’re in. Th...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN