ExtremeSwitching (EXOS/Switch Engine) - Page 228 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

sFlow not sampling on x670-48x

Any way to show the sflow config without showing all config? Not getting samples. What am I missing here? X670-48x Image : ExtremeXOS version 15.6.1.4 v1561b4 by release-manager on Tue Sep 30 14:06:19 EDT 2014 BootROM : 2.0.1.7 Diagnostic...

Resolved! Python http POST request

Hi, I'm quite new to XMC and Extreme in general and I'm trying to script that certain commands get send to switches when an AP gets connected/disconnected to it. For that purpose I'm using a notification and that triggers a workflow. Inside that wor...

Summit X670V-48x (16.2.4.5-patch1-8) Hal memory high issue

Hi X670v-48x memory high issue version - 16.2.4.5-patch1-8 System Memory Information ------------------------- Total DRAM (KB): 1048576 System (KB): 27052 User (KB): 915196 Free (KB): 106328 Memory Utilization Statistics -----------...

Resolved! EXOS - show radius - round trip time

New EXOS V30.2 shows this information: code: RADIUS server : 1 Status is Active host name : IP address : 10.0.1.52 Server IP Port: 1812 Client address: 10.1.0.4 (VR-Default) Retries : 2 * Timeout : 3 * Realm ...

Auto Negotiation after Upgrade to 22.5.1.7-patch1-7

The scenario: We are currently running 21.1.3.7-patch1-7 on our Summit x460-G2 endpoint switches. We use third party 10 Gb SM GBICs which currently are running using auto ON. After upgrading to 22.5.1.7-patch1-7 the port is disabled and there is a m...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN