ExtremeSwitching (EXOS/Switch Engine) - Page 233 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

EXOS-VM and GNS3: How realistic is the simulation of a topology?

To what extent has anyone here used that setup? I've tried an MLAG+STP+LACP core of four switches in EXOS 30.2. Frankly, I have given up and hooked up our actual new gear's OOB mgmt to our old network. I've added serial consoles and even gave them a...

Disabling vs. deleting a sharing group

Can you actually disable a sharing group in XOS just like you could set the "lag.0.x" port down in EOS? "disable sharing 45" seems to remove the group altogether. Although for that purpose "delete sharing 45" would have seemed more appropriate.

Cannot get node in stack to pass data

We have a stack of three switches of the Summit X450-G2. One failed and was replaced with the same one. Went through the usual process of replacing using enable stacking and assigning a number. We have it listed as a standby along with slot 3. 1 ...

24 port EXOS VM in GNS3/QEMU

Hi, I was able to successfully create a QEMU EXOS VM and console into it. Strangely though, when I create the QEMU VM, i choose 24 ports in e1000 type adapter however when i issue the 'show ports' command in EXOS, it only shows 12 ports. Is this lim...

Vulnerability scanning caused issues?

Hello, This past weekend we were running a vulnerability scan on our network. We've run these before without issue, however this time one of my switch stacks experienced an issue. Basically the vulnerability scan is a brute force login via SSH and t...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN