ExtremeSwitching (EXOS/Switch Engine) - Page 243 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! UEFI Boot Environment

We have recently installed a x440-G2. We are unable to boot into the UEFI imaging environment from our KACE box when directly connected to the switch. However if we place an unmanged 8 port switch between the systems and the x440 it boots in just f...

Problem tag vlan between ap7522 and switch summit x450e-48p

hello, In the goal to connect ap7522 to switch X450e . i have creat 1 Vlan "config" (tag 5) with ports 3 (untag) ,17(tagged) and 19(tagged) on the switch. To setup ap7522. i've tag native vlan 5 and allowed this one . but this configuration don't ...

Problem with port congestion

I`ve got two x440-24t switches in one city and two 1G uplink connections to the other city from these switches. When I configure the traffic between cities (around 200-300 Mb/s) to go through connection numer one (over DWDM form ISP1) everyting goes ...

LACP issue Between Extreme and PaloAlto

I have an X670-G2 Stack running 21.1.4.4-patch1-6.xos This connects to a PaloAlto Firewall using a lacp lag group. Things have been running well for 220 days without issue. This morning the district lost internet and PaloAlto claims it was a switch...

Resolved! How to Factory Reset x440-48p-10g after forgetting password

BootRom> config none doesnt work...I don't have a fail safe account set up.Is there any other option besides trying to mess with TFTP and get a new image onto the switch described here:https://extremeportal.force.com/ExtrArticleDetail?an=000074224I j...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN