ExtremeSwitching (EXOS/Switch Engine) - Page 296 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

All unused SFP ports on X670G2-48x is showing local-fault on link state even though it has nothing in it

I have a X670G2-48x, I've been trying to add in an edge node via SFP_SR onto it and all the unused ports link state are saying local fault. They have never been used nor have had a vlan attached to them. This is only happening to the unused ports on ...

Default route on VLAN

Hi, I have an problem with my core switch, the core is 2 Summit 670 with EXOS 16.1.3.6 . On the core and peripheral we have many VLAN but when I try to configure an client with the sumimt's IP as default gw I'm able only to ping other VLAN client.. b...

Disable SNMP port-up-down for all access ports but not interswitch ports

For a while now my log files (and email) have been getting spammed with "Agent Interface Down on interface xxxx Port" alerts. These are just access ports and they are going up or down because a user turns off their computer or undocks their laptop or...

how to check port is gigahertz or 10 gigahertz port

how to check whether this particular port is 1 gigahertz or 10 giagahertz

x460-48t experience "Packet transmit error"

Dealing with this issue past 5 years plus after many calls with TAC, engaged local Extreme SE and still no resolution of the issue. We have this X460-24t in our lab networks experience "Packet transmit error" every 60 days or less. The only way to g...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN