ExtremeSwitching (EXOS/Switch Engine) - Page 344 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Stacking with 440G2 while keeping "alternate" ports free?

Does anyone know if you can enable stacking on a 440-G2 (mostly for the possibility of future expansion and not having to renumber ports) but still use the alternate stacking (rear) ports as standard interfaces (in our case for an MLAG ISC instead of...

Private VLAN routing issue

I've configured a private VLAN for ports 1 and 2 so that they are isolated from one another. The configuration shown below is how I set it up, however, when I place a client on port 1 I can not ping the gateway.The client can ping the VLAN Mgmt99 IP...

Best practices for shared MAC on MLAG peers?

Creating an MLAG between two 440-G2's. The ISC will be an LACP of ports 15 and 16 and if I understand it, this LACP link must have a static MAC assigned on both sides of the ISC (on each peer). Is there a recommendation in terms of the MAC to use (do...

EXOS 22.5 "Creating Processes on Secondary Nodes"

One of new EXOS 22.5 Feature are this: "Creating Processes on Secondary Nodes" Changed CLI Commands Changes are underlined. create process name executable exe {start [auto | on-demand]} {nodenode} {vr vr-name} {description description} {arg1 {arg...

What is the EXOS License support dyanmic ACLs ?

Hi all I have a some question about dynamic acls in EXOS switch. What is the license can i useing dynamic ACLs in switch ? all license or need to edge licence over?

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN