ExtremeSwitching (EXOS/Switch Engine) - Page 370 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Using SNMP, how can I find the VLANs associated with an interface

Using SNMP, how can I find the VLANs associated with an interface? I know I can snmpwalk code:1.3.6.1.4.1.1916.1.4.17.1.1 but that only starts "at the top" (ie the first port), and takes AGES to get to the actual interface I'm interested in... Than...

XOS - clipaging

Hi, is there a way to disable clipaging on XOS-based switches permanently? The command 'disable clipaging'only effects the active ssh/telnet session. Thanks in advance Philipp

EDP functionality

Could someone explain what the following fields within the show edp port * detail command mean? Tx stats: sw-pdu-tx=846 vlan-pdu-tx=846 Rx stats: sw-pdu-rx=875 vlan-pdu-rx=0 Specifically the VLAN PDUs. Are these sent over a specific...

Adding a multicast stream using L3

I have added a new multicast stream , I have the server and on layer 2 I can see the correct streams , 239.192.1.56, and 239.192.2.56. on the edge device, I have MOP configured on the vlan and on the interlink vlan on the routing points , I have a ...

Unable to telnet to Slot on a Stack

Hi all, On my access layer switches, which are configured in stacking mode with versions 22.3.1.4 and 21.1.3.7, i am unable to telnet into slots. I am getting the following error: Slot-1 ACCESS01 # telnet slot 2 sh: can't create /dev/: Is a directo...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN