ExtremeSwitching (EXOS/Switch Engine) - Page 373 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

VXLan Support on x460-G2

Hi Community I thought I would drop the question here before asking an official question to GTAC. Why do we not have VXLan support on the x460-g2 ? The x460-g2 supports MPLS/L2VPN/VPLS ect Surely the switch has enough horse power to support VXlan....

Hi can anyone please tell me how to disable and then enable back ntp again on Created by ExtremeXOS version 21.1.3.7 switch?

Hi can anyone please tell me how to disable and then enable back ntp again on Created by ExtremeXOS version 21.1.3.7 switch?

I am using Black Diamond 8810 and installed new 48 port module in bay 4 and I am facing port up/down problem on this module.

Hello Community ! I am wandering, if the following setup is possible to work: 1. We have a set (let's say 5) of typical /24 subnets. 2. There are separate DHCP pools defined for each subnet on single MS DHCP server. 3. We have a router configured fo...

ERLP not working when using vlan default

I have a X440-G2-24P-10GE4 switch and configured two vlan's. VLAN-A and VLAN-B Firmware is 22.4.1.4 In VLAN-A there are the ports 1,2,3 and 4 and in VLAN-B ports 5,6,7 and 8. To make sure that there a no connetions made between VLAN-A and VLAN-B ...

copy firmware from primary to secondary

I update the firmware on my EXOS switch and after reboot I want to put that firmware on the primary partition. Is there a way to do that?

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN