Summit X460-G2 and PurView it is possible ?
How integrate Summit X460-G2 with PurView ?
Forum Posts
How i can connect those switches?
Hi again, I have a new scenario. Today we have this link between BD and "A" and a eaps ring. (A-B-C-D-E-F-G-H-I-J-A) "A" is the master. Is it possible to pass this new link between BD and "D"? (the red one) I think that i will need to make anothe...
Inline Power System information missing / No POE on otherwise working switch X440
I am looking at two X440-48Poe switches, both working with 15.7.1.4 XOS. One switch supplies POE and the other does not. On the working switch SHOW INLINE-POWER returns the firmware status and power wattage information. On the switch that does not su...
unconfigure radius not removing radius config
Hi All I have a little issue. I am trying to remove the radius XOS switch. The unconfigure Radius command does not remove the radius servers. Is there a particular process I am missing.
can you have more that one RP in Multicast Configuration
Understanding multicast , can you configure a different RP for a different stream . Currently using the global policy nlri 224.0.0.0/4 as a general catch all. Could I create another RP Policy fro a specific Multicast stream For example for the st...
