ExtremeSwitching (EXOS/Switch Engine) - Page 395 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Both nodes in a 2 switch stack show Role as Master

Switch 2, previously with Role Backup, is now showing at Role Master. Switch 1 is still actively the Master. All ports on Switch 2 are now showing as Ready. Devices connected to Switch 2 are no longer responding.

Memory process with high CPU

Hi, i have found that the ./policy process is using to much CPU and i am unable to stop it. PID PPID USER STAT RSS %MEM CPU %CPU COMMAND 2100 1 root S 9512 0.9 1 47.1 ./policyits is imposible for me to restart or terminate t...

Show Power Consumption of X440-G2

How do I see the power consumption of an X440-G2? All the switches I have with modular power supplies (X460s and X450s) display their current wattage when I use the "show power" command. The X440s show N/A for power usage and "show power detail" ju...

Extreme Switch ACL

Hi Support, I would like to ask about ACL configuration. Assuming I have 3 Vlan created. Vlan 10 , HR , 192.168.10.1/24 Vlan 20 , IT, 192.168.20.1/24 Vlan 30, GM, 192.168.30.1/24 I would like all 3 Vlan to be isolated from each other; not able to...

snmpassist

exos version 22.3.1.4, snmp assist gives fault message at the end Traceback (most recent call last): File "/usr/local/cfg/snmpassist.py", line 204, in main() File "/usr/local/cfg/snmpassist.py", line 119, in main (snmpuser, authtype, aut...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN