MAC address changing while sending to Router
END to END OSPF is not coming up, Extreme Switch is working as L2 device, while taking PCAP we got, Switch is changing the 3rd OCTET of MAC address while giving it to router.
END to END OSPF is not coming up, Extreme Switch is working as L2 device, while taking PCAP we got, Switch is changing the 3rd OCTET of MAC address while giving it to router.
I'd like to create a simple 4 port LAG between an Extreme Switch (x460-G2) and a Brocade switch (that is already successfully setup for LACP) I've never setup a LACP LAG on EXOS before. Is there a guide for this?
Hi I am looking at ECMP on a x440 G2 switch. The x440 is connected to two seperate routers and I would like to load balance traffic across them. The manuals indicate that it is supported on the x440 G2 but you can not configure the hashing. The x440...
Hi Team, I need to configure the 802.1X authentication in Summit X440 -24p-10g switch. I have NPS server in our environment . Server details :- Ip address 192.168.1.74 Subnet :- 255.255.255.0 Gateway :- 192.168.1.1 Sw...
When I configure ELRP on a x440-G2-24P-10GE with firmware 22.4.1.4 like: enable elrp-client configure elrp-client periodic Default ports interval 1 log-and-trap disable-port permanent. And I do a sh conf ELRP, I see: configure elrp-client perio...
User | Count |
---|---|
31 | |
28 | |
20 | |
20 | |
17 |