ExtremeSwitching (EXOS/Switch Engine) - Page 402 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Netlogin - Dot1X and Mac authentication on the same port

I have netlogin successfully working with 802.1x and MAC-based when a single device is connected. I am now trying to combine this in the form of an Avaya handset - a port is configured with Netlogin: - tagged VLAN for voice (with MAC auth) - untagge...

XOS LLDP announce management IP

Hello, is there a way in XOS to announce a IP-address non vr-mgmt/mgmt-vlan in LLDP management address? most of my customers didn't use the out-of-band management port. In this case the lldp management-address field doesn't make any sense. I funct...

ssh module not loaded, set xmod imag as primary?

set the image as primary, actually am facing an issue with ssh "module not loaded" after i have checked the switch i found xmod image not set: # sh version images Card Partition Installation Date Version Name Branch ---------...

How to connect via ssh from router cisco

Hello All, My ISP needs connect with switches extreme by SSH from rouert cisco since we want to maintain this connection as contingency. These are logs the cisco router RTT_BF_HC_ENVIGADO_PPAL#ssh 1.1.1.1 [Connection to 10.128.35.4 aborted: e...

Extreme Switch is unreachable

Hello I had an extreme switch summit 200 which was connected via port 21/22 via LWL to my core switch. Today I replace this switch with a newer model x440-g2 My problem: The x440 is in our network unreachable. I can not send a ping from this swit...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN