Hello, all!
Summit switches has limit 30W per port.
We have cameras which need 50W.
Can we make something with this, or in this case have to use external PoE injector?
Thank you!
Hi
We have a D series Extreme switch and would like to enable bootprelay so clients can receive their addresses from the companies DHCP server.
I see the commands are (assuming just the default vlan is configured)
"configure bootrelay add "
"en...
Yesterday I was working at a customer site installing EMC. After getting the switches setup and into EMC with SNMPV3 several of the switches 'went down'. They were still accessible, so looked and SNMP process was high. Also noticed ALOT of ELRP loo...
I have an x450a24t running the latest firmware, thus comes with the screenplay Web interface. Is there anyway to upgrade the firmware to get the chalet Web interface or is there another alternative that can give gui/web management in this way? ...
