ExtremeSwitching (EXOS/Switch Engine) - Page 425 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Modify port Vlan ID with PySnmp

Hi, im trying to modify the vlan id of port 24 on slot 2 (2:24) which as the ifindex of 152 according to snmpGet. I have been reading the documentation of PySnmp and from my point of view it is a bit vague, probably because i dont have yet a deep kn...

Allow all vlan's on trunk and mirror, even those not defined

We deploy a firewall to inspect traffic at clients sites as part of a security audit. I'd like to setup a trunk port that mirrors all vlan traffic; even those not specifically defined in the switch (SummitX). Cisco has an option to allow all vlan's...

EAPS Shared port issue in Extreme-X460

We are keep on getting this below error in Summit X460 switch : 06/28/2017 15:58:05.48 EAPS Shared-port 29 - Neighbor reachable. 06/28/2017 15:58:05.09 EAPS Shared-port 29 - Neighbor reachable. 06/28/2017 15:58:04.47 EAPS Shared-port 29 - Neighbo...

How to archive configurations to a TFTP or SCP server at regular intervals?

I am looking to archive the configuration of a Summit switch at regular intervals to a remote TFTP or SCP server. Although I can see that this can be done manually using: tftp put 192.0.2.156 primary.cfg I was looking for this to be done automatical...

Stp topology change not showing in syslog

Hi, i have my switches configured with the following: configure log filter LabFilter add events STP.SendClntTopoChgMsg configure log filter LabFilter add events STP.State.Topology configure syslog add 10.96.32.32:514 vr VR-Default local0 enable lo...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN