ExtremeSwitching (EXOS/Switch Engine) - Page 429 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Summit x450a-48t Infinite reboot How do I fix it?

Summit x450a-48t It will reboot continuously at boot time Extreme Networks * Summit X * Version 1.0.3.1 Branch trunk by release-manager on Fri 04/20/07 Copyright 2003-2007, Extreme Networks, Inc. Press and hold the to enter the bootstrap. Starti...

LOST FRAME SIZE 64 - 350

I have a domain eaps , and i did a test for a frame size 64 bytes , for the primary port the test is sucefull but when did a fail over at the secondary port test no pass. I have configure jumbo frame , can you share the possibilities for this scen...

x770 EXOS 21.1.2.14 memory utilization - what is normal and how to interpret output of mem-stats.py

My customer is complaining of memory leak on x770 running EXOS 21.1.2.14 patch 1-2. I see no known issues documented in TAC for this version and also refer to https://extremeportal.force.com/ExtrArticleDetail?an=000090145 to help me troubleshoot.Base...

LACP don't up after switch upgrade

Hi, all! X480-24x(10G4X){12.6.5.2 } == (40G) == X670-G2 {15.6.2.12} LACP work fine х480{12.6.5.2 } 30 27 LACP L3_L4 27 Y A 2 L3_L4 28 Y A...

How to config Radius Realm

Form Version 16.x show radius thate has Realm information Realm :Any from config radius command no include realm parameter. Anyone konw how to set this parameter

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN